Signal Dynamics Switch Cubes Manual do Utilizador descarregar pdf (Página 18)

Program Mode:

To enter the program mode, the bike’s run/kill switch must be in “kill”

position. After selecting “kill”, the press ( * ) and ( # ) together for 5

seconds. The program menu will then pop-up on the LCD screen.

The following keys are used to program the module:

Key Function

High / Low -Scroll Up

Horn -Scroll Down

( * ) -Select

Programmable Items:

• Screen Contrast – To adjust the contrast of the display.

• Time – This is the time displayed on the screen in the Operating

Mode and is used for error logging.

• Date – This is the date used for error logging.

• Metric or SAE – toggles the display from MPH/KPH,

Fahrenheit/Celsius on the thermometer and from Miles/Kilometers

on the odometer and trips display.

• Calibrate Temperature – Use this setting to calibrate your bikes

temperature to a known thermometer.

• Tach Multiplier – Used to set the number of pulses sent per engine

revolution.

• Max RPM - Set or View Max RPM (Max RPM may only be set

once on some bikes).

Programming

1 2 ... 13 14 15 16 17 18 19 20 21 22 23

Sem comentários

Signal Dynamics Switch Cubes Manual do Utilizador Página 18